Beschreibung
-
- Stabile und verwindungssteife Fahrgestellkonstruktion mit zusätzlichen Torsionsrohren für 3-Seiten-Kippung
- Konische Trapezprofil-Längsträger in hochfester Leichtbauweise mit kleinen Bodenblechen für hohe Beulfestigkeit und Stoßdämpfung
- Ganzstahl-Schweißkonstruktion mit Bodenblechen aus Feinkorn-Edelstahl 5 mm
- Hohlprofil-Seitenwände mit manueller Zentralverriegelung (für jede Wand separat bedienbar)
- Klappbarer Unterfahrschutz für den Straßenfertigereinsatz
- Faltbare Zurringe
- Einbau von Achsen namhafter Hersteller wie SAF oder BPW
- OPTIONAL: Ersatzradhalterung mit Schwenkausleger und Seilwinde an Stirnwand
- OPTIONAL: Elektropneumatische Seitenwand-Pendelverriegelung
- OPTIONAL: Stehplattform an der Stirnwand bestehend aus Alu-Schutzgitter und Geländer
- OPTIONAL: Rollplane aus Kunststoff inkl. Aluminiumrohr und Handkurbel
- OPTIONAL: Dosiereinheit für klappbare Rückwand mit Abschleppbolzen
Produktdetails
TYPENBEZEICHNUNG2-ACHS-3-SEITEN-KIPPER-SATTELANHÄNGER – BAUSTELLE
Für den Umschlag von Schüttgütern wie Sand, Kies, Schutt, Erdaushub etc. auf BaustellenMASSEInternal length: approx. 7,150 mm
Internal width: approx. 2,420 mm
Total width: 2,550 mm
Loading height, unladen: approx. 330 mm over fifth-wheel couplingFRAMENaxtra welded steel frame construction
Connector lock for tipper body with cross-over protection
Replaceable 2″ kingpinCHASSISAir suspension with autom. lowering device via inductive switch and lowering lock via rotary switch on semitrailer
air suspension unit with low-maintenance 430 mm disc brake axles , off-road version,
2 x 9 t rigid, wheelbase 1,310 mmAutom. lifting front axle = raised or lowered according to weight, as well as forced lowering incl. integr. speed-restricted moving-off aid with button operation in cab (no button installation on our part)
Tyres :
4 x 385/65 R 22.5 160J, manufacturer as per factory specifications
4 steel wheel rims 11.75 x 22.5, 10-hole, without rim offset , silverSUPPORT FIXTURES2 steel support legs, height-adjustable (only detachable when unladen)
BRAKE SYSTEMBrake system according to EC Directive 71/320 or EC E R13
Two-line brake.
Spring-loaded parking brake on both axles
EBS – electronic brake system
Wabco 2S2M = one axle sensed
RSS – stability program
Steel air tankTIPPING SYSTEM1 tipper cylinder for 3-way tipping, approx. 50 t initial lifting force,
1 arrester cable
1 pipe system with screw coupling DN20ELECTRICAL EQUIPMENT24 V lighting system according to EC Directive 76/756/E WG
2 seven-chamber tail lights
LED side marker lights
2 clearance lamps
2 contour lights
2 x 7-pin / 1 x 15-pin socketPAINTWORKBlasted with steel granulate, treated with zinc dust primer and spray painted 2-component acrylic paints for commercial vehicles (standard RAL or truck colour)
Plastic and hot-dip galvanised parts unpainted,
powder-coated attachments/installation parts blackReflective contour marking strips across entire length of sides and all-round contour marking at rear (white on sides and red at rear by default), according to ECE 48
ATTACHMENTSWheel chock(s) as per regulations
Noise dampers
Single wheel plastic mudguards with spray protection as per regulations
Aluminium trapezoidal underride protection, foldable, unpaintedWEIGHTSGross train weight (perm.): 40 t
Gross weight (techn.): 36 t
Axle assembly load (techn.): 18 t
Payload: approx. 25 – 26 t
Fifth-wheel load (techn.): 18 t
Tare weight: approx. 5.8 tTIPPING LOADING RAMPFull-steel welded construction with fine-grained special steel floor panels, 5 mm
(slight floor unevenness possible due to weld distortion)SIDE WALLSFeste Stahlblech-Vorderwand, 3 mm, ca. 1.360 mm hoch mit Baggerschutz, Verzurrösen, Leiter und Haltebügeln
2-teilige Alu-Hohlprofil-Seitenwände, 60/40 mm, ca. 1.200 mm hoch, aufklappbar mit man. Zentralverschluss (für jede Wand separat bedienbar), im Leerzustand klappbar = obere Pendellager mit Schraubensicherung Stahlblech-Rückwand
, 4 mm, ca. 1.300 mm hoch, aufklappbar mit erhöhtem Lager und autom. pneumatische Verriegelung
1 GriffZUBEHÖRHeckkennzeichnung nach ECE-Norm
Pfosten2 feste Mittelrungen in Seitenwandhöhe
2 feste hintere Eckrungen, erhöht, mit angeschweißtem Auswurfschacht
(Bodenfreiheit gekippt: ca. 550 mm)